WFPL500 500tpd Wheat Flour Mill Plant

The wheat cleaning process is wet cleaning,which including:

Three sieves
Two Scourers
Two Destoner
One classificator
One watering
One water washing
One water spraying
Five wind selection
One wheat brushing.

This project is specially suitable for hard wheat. With flow scale,the feeding speed of milling machine can be easily controlled,and easy to calculate the flour output rate.
The raw wheat cleaning part adopts one set of 500t per day.But for clean wheat,we adopt two independent 250t cleaning lines which are respectively used for the A&B milling production line.
Wheat milling process section
This part is divided into two lines, A and B.Each production capacity is 250t per day. The two lines have almost the same process.
All machines adopts domestic equipment, mainly including:

14 sets FMFQ10×2 pulverizers
6 sets FSFG6×24 high square sieves
4 sets FQFD60×2×3 purifiers
2 sets FFPD45×2 horizontal bran punching machines
3 sets FFPS89 (7#) bran brushing machines
15 sets impact loosening machines.

Product Features
This project adopts technology of 5B, 7M, 2S, 2T, 6P.For 3B and 4B,both coarse and fine skin will be milled.For 5B,only fine skin will be milled.

Main technical parameters

Model	Power（kw）	Production Capacity （ton/24hour）	Workshop Dimension （L×W×H mm）
80t	300	80	35X7.5X12.5
100t	450	100	35X7.5X14
120t	500	120	39X7.5X19
140t	580	140	44×7.5×19
160t	660	160	50×7.5×19
200t	750	200	50×7.5×22.5
220t	850	220	50×7.5×22.5
250t	960	250	51.5×12×27.5
300t	1200	300	61.5×12×27.5
350t	1260	350	61.5×12×27.5
400t	1650	400	72×12×30
500t	1800	500